Home › Spokane, WA
Playground Maintenance in Spokane, WA
Playground Maintenance Kings provides playground maintenance, playground repair, and playground safety inspection services in the Spokane, WA area for both commercial and residential play areas, from schools, parks, HOAs and daycares to backyard playsets. Contact us now for a free estimate.
How Much Does Playground Maintenance Cost in Spokane, WA?
Playground maintenance in Spokane, WA costs anywhere from $330 to $2,180 on average for a typical service visit on one playground, such as tightening hardware, replacing swing parts and patching or topping off surfacing. The price depends on the size of the play area, the age of the equipment, the type of surfacing, and which parts need replacing.
Do You Cover All of Spokane?
Yes, we take playground maintenance requests across Spokane and the rest of the Spokane-Spokane Valley, WA area. Labor and material costs here run about 9% above the national average, and the price range above already reflects that.
Do You Maintain Both Public Playgrounds and Backyard Playsets?
Yes, we work on playgrounds at schools, parks, HOAs, daycares, churches and apartment communities, and on backyard swing sets and playsets at homes.
Do You Service My Area?
Yes, we cover the Spokane, WA area. Send us the property address and we'll confirm.
How Often Should a Playground Be Inspected?
For public playgrounds, we recommend a quick check daily or weekly, a detailed check monthly or quarterly, and a certified inspection once a year. For a home playset, the CPSC suggests checking bolts twice a month and swing chains and seats monthly.
Do You Do Certified Playground Safety Inspections?
Yes, we can arrange an inspection by a Certified Playground Safety Inspector (CPSI), the certification run by the NRPA. You get a written report of the hazards found to plan repairs from.
What Does a Certified Playground Inspection Usually Cost?
Most CPSI inspections of one playground run about $200 to $1,000, depending on its size and how many structures it has. Sites with several playgrounds cost more.
What Does a Playground Maintenance Visit Include?
We check and tighten hardware, replace missing caps and bolts, inspect swing chains, seats and hangers, look for cracks, rust and splinters, rake and level loose fill, and clear debris. Then we tell you what needs repair.
Can You Make the Repairs From Our Inspection Report?
Yes, send us the report and we'll quote each item, starting with the most serious hazards so you can plan around your budget.
Do You Offer Ongoing Playground Maintenance Plans?
Yes, we can set up monthly, quarterly, twice-yearly or annual visits, or come out once. Busy sites, older equipment and areas with vandalism usually need more frequent service.
Do You Pressure Wash and Clean Playground Equipment?
Yes, we pressure wash play structures, slides and rubber surfacing and remove graffiti, trash and debris. Tell us whether you want a one-time cleaning or cleaning on every visit.
Can You Work Around School Hours or Park Hours?
Yes, we can schedule work before opening, after school, on weekends or during breaks so the playground isn't closed during busy times.
How Quickly Can You Fix Unsafe Playground Equipment?
We put broken or unsafe equipment ahead of routine work and confirm a time when you contact us. If a part has to be ordered from the manufacturer, we can usually make it safe or close it off first.
What Information Do You Need When I Contact You?
We need the address, the number of play structures, photos of the damage, the surfacing type and any manufacturer name or part number. If you have a recent inspection report, send that too.
Will Someone Need to Be There During the Work?
No, as long as we can get through any locked gates.
Can You Work With Our HOA Board or Property Manager?
Yes, we can coordinate the quote, scheduling and sign-off with the board, the manager or the facilities contact. Tell us who approves the work.
Can I Get a Price Before the Work Begins?
Yes, we quote from your photos or an inspection report and confirm the price before we start. If we find more problems on site, we check with you before doing extra work.
Does Our Insurance Company Require a Playground Inspection?
Yes, many insurers expect a yearly inspection by a certified inspector and records of regular maintenance, but policies differ, so check with yours. We can give you the report and repair records.
Are Playground Safety Inspections Required by Law?
No, not everywhere. The CPSC handbook is federal guidance rather than a regulation, but some states make it mandatory for public playgrounds, and many insurers expect a yearly certified inspection.
How Long Does a Playground Repair Take?
Most hardware, swing and small surfacing jobs are done in one visit. Parts ordered from the manufacturer add shipping time, and we'll give you a timeline with the quote.
Is It Worth Repairing an Old Playground Instead of Replacing It?
Yes, in most cases, if the frame is sound and parts are available. Once repairs cost more than about half the price of new equipment, or posts and welds are badly corroded, we usually recommend replacing it.
Can You Replace Swing Chains, Seats and Hangers?
Yes, we replace worn or rusted chains, cracked seats, worn hangers and open S-hooks. If the frame is still sound, replacing the parts is usually all a swing needs.
How Often Should Playground Swings Be Replaced?
There's no set age. We replace chains, hangers and seats when they reach the manufacturer's wear limits, and that depends on how much use and weather they get.
Can You Fix Loose Bolts and Missing Caps?
Yes, we tighten loose hardware, replace missing bolts and caps, and cut or cap bolt ends that stick out more than the bolt's width past the nut.
How Deep Should Wood Chips or Mulch Be Under a Playground?
The CPSC calls for at least 9 inches of wood chips, wood fiber or shredded rubber under home equipment up to 8 feet tall, and at least 12 inches on public playgrounds. Fresh fill packs down by about a quarter, so we fill above the minimum.
Can You Top Off Wood Chips, Engineered Wood Fiber or Rubber Mulch?
Yes, we rake displaced material back from under swings and slide exits, add new fill and bring it back to the right depth. Tell us roughly how big the play area is.
Can You Repair Poured-in-Place Rubber Surfacing?
Yes, we patch torn, cracked and worn spots by troweling in new rubber mixed with a polyurethane binder. Damage shows up most under swings and at slide exits, so send photos and rough sizes.
Can You Test Whether Our Rubber Surfacing Still Cushions Falls?
Yes, we can arrange an impact test against the ASTM F1292 standard. Poured rubber hardens with sun and age, so it can look fine and still fail to cushion a fall.
Can You Fix a Cracked Plastic Slide?
Yes, in most cases. Small cracks can be patched, but a slide with large or spreading cracks should be replaced with a matching section or a new slide.
Can You Fix Rust on Metal Playground Equipment?
Yes, we clean, sand and repaint surface rust with lead-free paint. Heavy rust at the base of a post, a weld or a connection may mean that part needs replacing.
Can Playground Equipment Go Directly on Grass?
No, grass and dirt pack hard and wear thin, so the CPSC doesn't count them as safety surfacing. Use wood fiber, rubber mulch or tested rubber surfacing instead.
Can You Fix Rubber Tiles or Artificial Turf Under a Playground?
Yes, damaged rubber tiles can usually be replaced one at a time. On turf we fix open seams and worn spots.
Can You Repair a Wooden Backyard Playset?
Yes, we replace rotted or split boards, sand splinters, tighten bolts and reseal the wood. Wooden sets usually need resealing every 1 to 2 years, and the sealer needs at least 24 hours to dry before kids play.
Can You Fix a Playset That Wobbles or Leans?
Yes, we check the anchors, footings and joints, then tighten, re-anchor or replace what's failing. Tell us whether the set is staked into the ground or set in concrete.
Can You Replace Climbing Nets and Ropes?
Yes, we replace frayed or loose nets and ropes and secure both ends so they can't loop around a child.
Can You Get Parts for Discontinued Playground Equipment?
Yes, in many cases. We look for the original part first and find a compatible replacement if it's gone. Send a photo of the part and any label or part number on the structure.
Can You Repair a Vandalized Playground?
Yes, we replace broken, cut or burned parts, remove sharp edges and repaint damaged areas. Close off the damaged equipment and send photos so we can order parts.
Can You Bring an Older Playground Up to Current Safety Standards?
Yes, in many cases. We fix openings that can trap a child's head, close S-hooks, add guardrails or barriers to platforms 20 inches or higher on preschool equipment or 30 inches on school-age equipment, and bring surfacing to depth. Some older designs need replacing.
Can You Check Whether Our Playground Is ADA Accessible?
Yes, we can arrange an ADA accessibility assessment of the play area and its surfacing. Loose sand and pea gravel aren't wheelchair accessible, so the surfacing is often part of the fix.
Should We Keep Kids Off Broken Equipment Until You Arrive?
Yes, tape off the broken piece and keep children away until it's repaired.
How Far Should Surfacing Extend Around Playground Equipment?
At least 6 feet in every direction. In front of and behind swings, it should extend twice the height of the top bar.
Can You Fix Standing Water or Drainage Problems Under a Playground?
Yes, we can regrade low spots and improve drainage so water stops pooling. Standing water breaks down wood fiber and rubber surfacing and makes sand pack hard.
Can You Get Our Playground Ready for Winter?
Yes, we can take down swing seats and canopies where the manufacturer recommends it, tighten hardware, and check everything again in spring.
Do I Need a Permit for Playground Repairs?
No, ordinary repairs and like-for-like part replacements usually don't need one under the model building codes. New or taller commercial equipment often does. We'll flag it if your job might, and your local building department makes the call.
Can We Do Our Own Playground Maintenance?
Yes, tightening bolts, raking loose fill and picking up debris are fine to do yourself. Leave structural damage and poured rubber repairs to us.
Will Repairs Affect the Manufacturer's Warranty?
Yes, they can if the parts or repair don't match the original specs. We use the manufacturer's parts where they're available, but it's worth checking your warranty terms.
