Home › Cleveland, OH
Playground Maintenance Kings provides playground maintenance, playground repair, and playground safety inspection services in the Cleveland, OH area for both commercial and residential play areas, from schools, parks, HOAs and daycares to backyard playsets. Contact us now for a free estimate.
Playground maintenance in Cleveland, OH costs anywhere from $290 to $1,940 on average for a typical service visit on one playground, such as tightening hardware, replacing swing parts and patching or topping off surfacing. The price depends on the size of the play area, the age of the equipment, the type of surfacing, and which parts need replacing.
Yes, we take playground maintenance requests across Cleveland and the rest of the Cleveland, OH area. Labor and material costs here run about 3% below the national average, and the price range above already reflects that.
Yes, we work on playgrounds at schools, parks, HOAs, daycares, churches and apartment communities, and on backyard swing sets and playsets at homes.
Yes, we cover the Cleveland, OH area. Send us the property address and we'll confirm.
For public playgrounds, we recommend a quick check daily or weekly, a detailed check monthly or quarterly, and a certified inspection once a year. For a home playset, the CPSC suggests checking bolts twice a month and swing chains and seats monthly.
Yes, we can arrange an inspection by a Certified Playground Safety Inspector (CPSI), the certification run by the NRPA. You get a written report of the hazards found to plan repairs from.
Most CPSI inspections of one playground run about $200 to $1,000, depending on its size and how many structures it has. Sites with several playgrounds cost more.
We check and tighten hardware, replace missing caps and bolts, inspect swing chains, seats and hangers, look for cracks, rust and splinters, rake and level loose fill, and clear debris. Then we tell you what needs repair.
Yes, send us the report and we'll quote each item, starting with the most serious hazards so you can plan around your budget.
Yes, we can set up monthly, quarterly, twice-yearly or annual visits, or come out once. Busy sites, older equipment and areas with vandalism usually need more frequent service.
Yes, we pressure wash play structures, slides and rubber surfacing and remove graffiti, trash and debris. Tell us whether you want a one-time cleaning or cleaning on every visit.
Yes, we can schedule work before opening, after school, on weekends or during breaks so the playground isn't closed during busy times.
We put broken or unsafe equipment ahead of routine work and confirm a time when you contact us. If a part has to be ordered from the manufacturer, we can usually make it safe or close it off first.
We need the address, the number of play structures, photos of the damage, the surfacing type and any manufacturer name or part number. If you have a recent inspection report, send that too.
No, as long as we can get through any locked gates.
Yes, we can coordinate the quote, scheduling and sign-off with the board, the manager or the facilities contact. Tell us who approves the work.
Yes, we quote from your photos or an inspection report and confirm the price before we start. If we find more problems on site, we check with you before doing extra work.
Yes, many insurers expect a yearly inspection by a certified inspector and records of regular maintenance, but policies differ, so check with yours. We can give you the report and repair records.
No, not everywhere. The CPSC handbook is federal guidance rather than a regulation, but some states make it mandatory for public playgrounds, and many insurers expect a yearly certified inspection.
Most hardware, swing and small surfacing jobs are done in one visit. Parts ordered from the manufacturer add shipping time, and we'll give you a timeline with the quote.
Yes, in most cases, if the frame is sound and parts are available. Once repairs cost more than about half the price of new equipment, or posts and welds are badly corroded, we usually recommend replacing it.
Yes, we replace worn or rusted chains, cracked seats, worn hangers and open S-hooks. If the frame is still sound, replacing the parts is usually all a swing needs.
There's no set age. We replace chains, hangers and seats when they reach the manufacturer's wear limits, and that depends on how much use and weather they get.
Yes, we tighten loose hardware, replace missing bolts and caps, and cut or cap bolt ends that stick out more than the bolt's width past the nut.
The CPSC calls for at least 9 inches of wood chips, wood fiber or shredded rubber under home equipment up to 8 feet tall, and at least 12 inches on public playgrounds. Fresh fill packs down by about a quarter, so we fill above the minimum.
Yes, we rake displaced material back from under swings and slide exits, add new fill and bring it back to the right depth. Tell us roughly how big the play area is.
Yes, we patch torn, cracked and worn spots by troweling in new rubber mixed with a polyurethane binder. Damage shows up most under swings and at slide exits, so send photos and rough sizes.
Yes, we can arrange an impact test against the ASTM F1292 standard. Poured rubber hardens with sun and age, so it can look fine and still fail to cushion a fall.
Yes, in most cases. Small cracks can be patched, but a slide with large or spreading cracks should be replaced with a matching section or a new slide.
Yes, we clean, sand and repaint surface rust with lead-free paint. Heavy rust at the base of a post, a weld or a connection may mean that part needs replacing.
No, grass and dirt pack hard and wear thin, so the CPSC doesn't count them as safety surfacing. Use wood fiber, rubber mulch or tested rubber surfacing instead.
Yes, damaged rubber tiles can usually be replaced one at a time. On turf we fix open seams and worn spots.
Yes, we replace rotted or split boards, sand splinters, tighten bolts and reseal the wood. Wooden sets usually need resealing every 1 to 2 years, and the sealer needs at least 24 hours to dry before kids play.
Yes, we check the anchors, footings and joints, then tighten, re-anchor or replace what's failing. Tell us whether the set is staked into the ground or set in concrete.
Yes, we replace frayed or loose nets and ropes and secure both ends so they can't loop around a child.
Yes, in many cases. We look for the original part first and find a compatible replacement if it's gone. Send a photo of the part and any label or part number on the structure.
Yes, we replace broken, cut or burned parts, remove sharp edges and repaint damaged areas. Close off the damaged equipment and send photos so we can order parts.
Yes, in many cases. We fix openings that can trap a child's head, close S-hooks, add guardrails or barriers to platforms 20 inches or higher on preschool equipment or 30 inches on school-age equipment, and bring surfacing to depth. Some older designs need replacing.
Yes, we can arrange an ADA accessibility assessment of the play area and its surfacing. Loose sand and pea gravel aren't wheelchair accessible, so the surfacing is often part of the fix.
Yes, tape off the broken piece and keep children away until it's repaired.
At least 6 feet in every direction. In front of and behind swings, it should extend twice the height of the top bar.
Yes, we can regrade low spots and improve drainage so water stops pooling. Standing water breaks down wood fiber and rubber surfacing and makes sand pack hard.
Yes, we can take down swing seats and canopies where the manufacturer recommends it, tighten hardware, and check everything again in spring.
No, ordinary repairs and like-for-like part replacements usually don't need one under the model building codes. New or taller commercial equipment often does. We'll flag it if your job might, and your local building department makes the call.
Yes, tightening bolts, raking loose fill and picking up debris are fine to do yourself. Leave structural damage and poured rubber repairs to us.
Yes, they can if the parts or repair don't match the original specs. We use the manufacturer's parts where they're available, but it's worth checking your warranty terms.